Will a metering block with a .159 work on a 1000 Demon .180
4 posts
• Page 1 of 1
Will a metering block with a .159 work on a 1000 Demon .180
by Edcarb » Sun Oct 22, 2023 8:51 am
Using Quick fuel 4 emulsion blocks with the main passage plugs about a inch down. Heard that helps pull fuel out the booster?? Boosters size is .180 down leg. Transbraked Bigblock, Lowered IFR and using 2 #31 Emulsion, Read a little bigger Emulsion is a little richer at first then goes leaner? Will have floats set higher if that helps pull bigger angle passage.
- Edcarb
- Posts: 26
- Joined: Tue Aug 30, 2022 5:27 pm
Re: Will a metering block with a .159 work on a 1000 Demon .
by rgalajda » Sun Oct 22, 2023 9:36 am
- rgalajda
- Posts: 373
- Joined: Sat Mar 20, 2021 8:21 am
- Location: Ontario,Canada
Re: Will a metering block with a .159 work on a 1000 Demon .
by Edcarb » Mon Oct 23, 2023 1:01 am
Just don't have Demon Metering blocks and hope the ones I got will work fine. I read .150 will work today, will .010 slow the fuel down to much on a bigblock on brake?
- Edcarb
- Posts: 26
- Joined: Tue Aug 30, 2022 5:27 pm
Re: Will a metering block with a .159 work on a 1000 Demon .
by Edcarb » Tue Oct 24, 2023 6:25 am
Sorry can't make mind up on which carb , OCD Sucks!
- Edcarb
- Posts: 26
- Joined: Tue Aug 30, 2022 5:27 pm
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 6 guests