Partial throttle tuning help please!

[69BBSS]

Car is a pump gas 10.5:1 565 BBC with a pro systems 1150 Dominator. The problem I’m having is that it wants to go crazy rich in part throttle cruise (10.5-11.5) and at WOT it’s a bit lean at 14.3. Do I need to take some out of the primaries and add to the main jets? Or do I need to mess with the dreaded emulsion tubes? Any help is very very much appreciated. Thank you.

[RFSPHPbb]

is it a 2-circuit or 3-circuit version?

[jmarkaudio]

Depending on when it was built it can be 2 or 3 circuit. If it has the Venom 2 blocks it's 2 circuit. And they all need recalibration. Lowered idle feed, emulsion recalibration, t-slot restrictions... Are you up to threading small passages?

[69BBSS]

Yes. They are the Venom 2 metering blocks and yes, I can thread the passages but they are SO small. Do they need to be larger? Idle feed is 35-8div. I’ve got the build sheet picture but it’s not letting me upload it here because it saids the file is “too large”

[RFSPHPbb]

what is "35-8div.?"

[69BBSS]

That’s what it saids on the build sheet for the idle feed. (Primary and secondary)

[jmarkaudio]

div suggests divorced idle, but some I've gone thru don't always match the sheet. Send pictures to jmarkaudio@aol.com. Metering block both sides and spec sheet.