Bog when going on the converter

[Banjo]

When the air gets good, my car will get a bog getting on the converter. Would this be a contender for the blp sure shot. I have check the accelerator pump, all the passages have been drilled out.

This a 406, with a 1050 dominator.

Link to log pic.
https://flic.kr/p/2kVkQhE

Thanks in advance

[hipockets72]

Is this a 3 circuit? What emulsion set up?

[Banjo]

This is a two circuit, .024 bleeds on I believe positions 1 and 3, I will have to verify.

[jmarkaudio]

What fuel?

[Banjo]

Alky, these are also the blocks I got from you some years back.

[Banjo]

Correction, the bleeds are in positions 1 and 4.

Anyone have any experience with the sure shot?

[mike laws]

[mike laws]

[ojh]

Are the carbs 1:1 linkage?

[jmarkaudio]

Few things with methanol, larger squirter, I have up to a .072 I think, and another is try opening up the mixture screws 1/2 turn more. Smaller idle bleeds or larger idle feeds can be used, and you can also try opening the primary idle speed and taking the idle speed back down with the secondary. This exposes more primary t-slot.