Main Jetting clarification for a 3-to-2 Conversion 8896
15 posts
• Page 2 of 2 • 1, 2
Re: Main Jetting clarification for a 3-to-2 Conversion 8896
by gntkllr » Sun Mar 28, 2021 2:55 pm
^ ^ ^ Yay? Nay?...
Mike
-
gntkllr - Posts: 37
- Joined: Mon Dec 14, 2020 3:22 am
Re: Main Jetting clarification for a 3-to-2 Conversion 8896
by jmarkaudio » Wed Mar 31, 2021 2:48 pm
84/94 with a primary PVCR at .086 should be plenty safe unless the fuel is highly oxygenated. Most race Dominators I build run around 92 to 93 square with Holley jets.
-
jmarkaudio - Posts: 177
- Joined: Sat Apr 13, 2019 2:14 pm
Re: Main Jetting clarification for a 3-to-2 Conversion 8896
by gntkllr » Thu Apr 01, 2021 5:51 pm
Thank you, Mark. 
Mike
-
gntkllr - Posts: 37
- Joined: Mon Dec 14, 2020 3:22 am
Re: Main Jetting clarification for a 3-to-2 Conversion 8896
by 68 HEMI GTS » Sat Apr 10, 2021 5:36 am
- 68 HEMI GTS
- Posts: 2
- Joined: Fri Apr 09, 2021 3:44 pm
Re: Main Jetting clarification for a 3-to-2 Conversion 8896
by jmarkaudio » Fri Apr 23, 2021 12:16 am
Big blocks have a large plenum, just usually wants more fuel.
-
jmarkaudio - Posts: 177
- Joined: Sat Apr 13, 2019 2:14 pm
15 posts
• Page 2 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 1 guest