Electric primer pump

Electric primer pump

Postby rgalajda » Wed Jun 29, 2022 9:22 pm

Just wondering if anybody has had experience with an electric primer pump for a mechanical fuel pump. The reason I ask is because people are saying there car won't start with one pump of the accelerator after the car sits for a week or two. The problem being is that today's fuel evaporates from the carb after extended intervals of non use such as two weeks requiring cranking of the engine to refill the fuel bowls.
rgalajda
 
Posts: 373
Joined: Sat Mar 20, 2021 8:21 am
Location: Ontario,Canada

Re: Electric primer pump

Postby GTO Geoff » Thu Jun 30, 2022 5:39 am

Yes,
I know of this being done, but I don't like the idea & would not do it. The mech pump is designed to draw fuel without too much restriction in the line. Ok for starting but I wonder if pump performance is compromised at higher rpms on a perf engine when max fuel delivery is reqd.
GTO Geoff
 
Posts: 229
Joined: Fri Dec 25, 2020 1:21 am

Re: Electric primer pump

Postby Right hand drive » Thu Jun 30, 2022 7:46 am

I did look into it and even bought a small inline pump and some fittings. Like Geoff said the mechanical would like as free flowing as possible feed line. Although the mechanical could pull fuel through some of the inline pumps I didn’t trust it could be enough flow. I planned to put a Y piece before and after the pump for full flow around it during normal operation and a switch for the electric pump for when needed. The bypass would need a one way valve to prevent the electric pump pushing some fuel back through the bypass line. All up I abandoned it mostly due to cost v benefit as I was to use all -8 AN fittings (would have been $500+). It could certainly be done cheaper but I’d think the bypass line around the pump is necessary.
Right hand drive
 
Posts: 334
Joined: Thu Dec 24, 2020 11:54 am
Location: Victoria Australia


Return to Holley

Who is online

Users browsing this forum: No registered users and 10 guests