Need to know Q/F billet 2 circuit m/ block main well size?

[Edcarb]

Guess Ill keep the 2 circuit QF ones since they don't have Tubes in mains and be easier to enlarge angle channels. Might try with only enlarging angle since no tubes will help flow? There cup is half way down, not wanting to mess with that lol.

[Edcarb]

I was wrong, the intermediates restriction is by the jets lol.

[bigblockmark]

Edcarb. I received your PM. Don't know how to reply directly, sorry. jmarkaudio is who I would PM for an experienced answer. My guess is yes.

[jmarkaudio]

The QF 3 emulsion 2 circuit blocks are fine, .160 on the angle channel is plenty.

[Edcarb]

Thanks alot Mark, goin to lower IFR and do two .028 like I thought I saw you recondmend, Do you think these have 12 hole boosters, sounds like I might be better off with the big Venturi?

[Edcarb]

Thanks alot Mark, goin to lower IFR and do two .028 like I thought I saw you recondmend, Do you think these have 12 hole boosters, sounds like I might be better off with the big Venturi?

[jmarkaudio]

12 hole boosters will be fine